Silicone Rubber Moulded Parts

IRC Moulded Rubber Products comprise wide range of Polymer use, i.e. EPDM, Silicone, Neoprene, Nitrile, SBR and NR. Compounding is done to meet relevant BS, DIN and ASTM Standards to achieve best performance.

Production of Rubber Moulded Products is done by Compression and Transfer Moulding process followed by automatic Deflashing.

In the Transfer Moulding process rubber compound is transfered under pressure into the mould cavity and allowed to fill the cavity obtaining the shape of the mould and cross-linked by using the platen temperature, finally product is formed in the required shape. In compression Moulding process compound is pressed under sufficient hydraulic pressure to obtain mould cavity shape and compaction while curing process in progress.

General Physical Properties
(ASTM C 1115 Table 2, Type C)
Properties Specifications Test Method
Hardness (Shore A) 60±5 ºA ASTM D 2240
Tensile Strength, Mpa 5 ASTM D 412
Elongation Break, % 200 ASTM D 412
Compression Set - 22 Hours at 70° C 15 % Max ASTM D 395
Ozone Resistance 20% Stretch 40° C 100 PPM 96 Hrs No cracks ASTM D 1149
(Specimen A)